The RFM 2000 is the most cost effective, environmentally sound solution to be introduced to the cleaning and coating removal industries in years. Utilizing VLN’s patented ultra-sonically generated forced pulsejet technology, the RFM 2000 will increase the impact pressure of your existing High Pressure waterblast equipment by at least 3 times.

Bring New Life to Your Existing Pumps

• Dual Function allows contractors to switch between High-Pressure and Ultra-High “Pulsed” efficiencies
• Utilizes your existing High -Pressure equipment
• High portability
• Operates without any UHP hoses or accessories
• Based on 30 years of R&D
• Low operating and maintenance costs
• Fully automated requiring only single operator
• Minimize machine scheduling
• Maximize production of your equipment
• Water quality is not an issue

The RFM 2000 is designed for any tough coating removal job. By applying the patented forced pulsejet technology, paint and rusted surfaces can be stripped to bare white metal at 8000 psi, which normally require as high as 30,000 psi.

The flow is modulated by an ultrasonic transducer, which produces high frequency forced pulsed waterjets. These pulses or “slugs” act as miniature “Shockwaves” producing extremely high dynamic pressure on the target surface. Hard coatings subjected to the pulsed jet will fail or disintegrate under the intense repetitive loading.

Standard RFM Specifications
Operating pressure & flow	8,000 psi (560 bar, 55 mPa), 8 US gpm(30litre/min)
Rotating head with twin orifices	2 X 0.040-in (2 X 1.04-mm)
Custom Swivel	600 -1,500 rpm
High Pressure Hose	50-ft (15.2-m)
Electrical Cable	25 ft (7.6-m) 12/3 service cord with 220V/15A
Ultrasonic Generator and Transducer	1.5 kW, 20 kHz
Overall Dimension	30 (L) X 22-(D) X 30(H)-in (0.76 X 0.56 X 0.76-m).
Weight	290-lb (131.5-kg)
Handheld Gun	Weight 15 lb (6.8-kg); Length 36-in (0.91-m).
Jet Thrust Force	33-lb (15-kg)
Cleaning Path With	2.0 - 2.25-in. (51 - 57-mm)

Heavily rusted metal sample removed to bare white metal with single pass using the Standard RFM at 8000 psi

Dual Function

Contractors can go from Ultra High Pressures to standard pressures with the "Flick of a Switch"

Basic requirements to operate the RFM 2000

Description	Basic Requirement
High Pressure Water	8 US gpm (30 litre/min) @ 8,000 psi
Compressed Air	3.4-ft3/min (0.1-m3/min) volume @ 40 psi
Electricity	220V/15A, 50/60 Hz

Triple Your Performance

Just think of achieving an SSPC white metal finish using only 8000 psi! That’s what you get with the patented RFM 2000 Pulsed Generator. VLN’s Standard RFM 2000 Series is easily installed on any conventional waterblast pump generating 8000 psi (560 Bar) with a flow rate of 8 US gpm.

Customize All of Your Existing Pumps

VLN’s team of scientists and engineers can custom build our RFM to work with a wide variety of pressures and flow rates.

VLN also offers complete systems with pumps and Ultra Sonics

Ultra High Efficiencies without
the Ultra High Investment